Welcome to the 'Managers and Professionals - Full Test'
This practice test will select 50 random questions, which you will be expected to complete within the allocated 45 minute time limit. You will be shown correct and incorrect answers at the end of the quiz.
Each question is representative of the type used in the Managers and Professionals Test.
Instructions:
- The test will begin after you select the 'Start Quiz' button below.
- For each question, choose from the multiple choice answers provided.
- Some questions may have more than one answer, a note will be displayed when to do this.
- After the last question, click 'Submit' to be shown your results.
Ready? Click 'Start Quiz' to begin.
1.
What should you do if you encounter hazardous pigeon droppings and nests in your work area?
2.
What is the most effective way to keep children away from a construction site near a school?
3.
How should you approach walking past a mobile crane operator?
4.
Which TWO details would you expect to find on a PAT test label?
5.
Who is legally responsible for ensuring project arrangements allocate sufficient resources under current CDM regulations?
6.
If you don't understand something during a site induction, what should you do?
7.
If you suspect you need to carry out a survey in a confined space, what should be your first consideration?
8.
What must all lifting equipment and accessories be?
9.
What precautions should be taken before eating or drinking after exposure to lead?
10.
During construction, which two activities are principal designer's responsibilities under current CDM regulations?
11.
When should installed signs and guarding equipment be inspected?
12.
For a notifiable project under current CDM regulations, what must be displayed on a construction site?
13.
Which statement about illegal drugs in the workplace is true concerning site work?
14.
What is the purpose of an on-site risk assessment?
15.
How should highly flammable materials be stored?
16.
When using oxyacetylene welding equipment on-site, how should the bottles be positioned?
17.
Identify which hazards when someone nearby cuts concrete blocks with a disc-cutter. (Select more than one)
18.
What must be displayed conspicuously on the rear of a single vehicle used for mobile works during the day?
19.
What does the term "hazard" refer to?
20.
What action is needed when a vehicle with a direction arrow travels between sites?
21.
Where should LPG cylinders be placed when supplying a site cabin?
22.
To whom should risks and control measures from a COSHH assessment be explained?
23.
Why is an RCD (residual current device) necessary for 230 volt electrical equipment?
24.
How can a site worker verify the correct operation of the RCD (residual current device) for a 230 volt hand tool?
25.
What must a contractor include when constructing a fuel-oil storage area?
26.
How often must a competent person inspect a scaffold to ensure safety during an inspection at height?
27.
Why is it essential to collect dust and prevent it from getting into the air when using a power tool to cut or grind materials?
28.
What should NOT be done when evaluating pollution risk before starting construction work?
29.
What would you NOT expect in a well-organized site transport system?
30.
If you're in a small enclosed space and smell something like rotten eggs, what could it be a sign of?
31.
Blue and white signs represent:
32.
Why should you avoid touching the nozzle of a CO2 fire extinguisher?
33.
When considering a construction site's electrical system, which colour plug signifies a 415 volt supply?
34.
How should acetylene and oxygen cylinders not in use be stored for safety?
35.
What should a site manager do to ensure private motorists' safety if transport leaving the site might deposit mud on public roads?
36.
What is NOT a danger when walking through sludge or muck at the bottom of a small enclosed space?
37.
Which of these is NOT a hazard in a confined space?
38.
How should you be informed about the site traffic rules?
39.
When must an employer create a written health and safety policy and record risk assessments?
40.
What additional measure is required when someone wears a harness while working at height?
41.
Why is methane gas dangerous in small enclosed spaces? (Select more than one)
42.
What is the maximum vertical distance between landings when using ladders for access?
43.
How often must lifting equipment for carrying persons, like cherry pickers, be thoroughly examined by a competent person?
44.
What is the most effective measure to manage the risk of reversing site vehicles?
45.
What is the likely cause if you see 'frost' around the valve on an LPG cylinder?
46.
What is the best course of action if someone contacts a live cable?
47.
Where would you find information about risks associated with a structure built in the last 10 years?
48.
According to current CDM regulations, if a designer appoints another designer or contractor, they must:
49.
What does experiencing a 'ringing' sound in your ears after being near loud equipment signify?
50.
What is the purpose of a 'permit-to-work' system?
