Welcome to the 'Operatives - Full Test'
This practice test will select 38 random questions, which you will be expected to complete within the allocated 45 minute time limit. You will be shown correct and incorrect answers at the end of the quiz.
Each question is representative of the type used in Part 1 of the Operatives Test. When you're finished, don't forget to practice the Case Study style questions for Part 2.
Instructions:
- The test will begin after you select the 'Start Quiz' button below.
- For each question, choose from the multiple choice answers provided.
- Some questions may have more than one answer, a note will be displayed when to do this.
- After the last question, click 'Submit' to be shown your results.
Ready? Click 'Start Quiz' to begin.
1.
What are TWO methods to prevent dust from becoming airborne when using a power tool to cut or grind materials?
2.
Under what circumstances should you wear eye protection?
3.
If you can't complete a job as stated in the method statement, what should you do?
4.
When using a CAT (cable avoidance tool), what other piece of equipment is required?
5.
What is the PRIMARY reason for attending a site induction?
6.
Where should LPG cylinders be placed when supplying a site cabin?
7.
What is the minimum noise level at which an employer is legally required to provide hearing protection to workers upon request?
8.
What does it likely mean if the dirt you are digging has a strange smell?
9.
What should you do if a large fire has been reported but you have not been trained in using a fire extinguisher?
10.
How can we best protect people below from items falling off a scaffold platform?
11.
At what point should guard-rails be installed on a working platform?
12.
When should safety footwear be worn on a construction site?
13.
What is the meaning of this sign?
14.
What is the meaning of this sign?
15.
How should you proceed if you're asked to perform a task that will generate dust?
16.
What is the meaning of this sign?
17.
How can a site worker verify the correct operation of the RCD (residual current device) for a 230 volt hand tool?
18.
Why shouldn't you use white spirit or other solvents to clean your hands?
19.
What precautions should be taken when a vehicle is dumping material into an excavation?
20.
What should you do first if you think mobile plant is operating too close to your work area?
21.
Green and white signs represent:
22.
When considering a construction site's electrical system, which colour plug signifies a 415 volt supply?
23.
Why should a ladder not be painted?
24.
Who should give signals to a truck driver tipping materials into a trench?
25.
Is it mandatory for your employer to provide a first-aid box?
26.
Can you remove a scaffold guard-rail for a survey if you're not a scaffolder?
27.
How should you address an always-empty first-aid box on site?
28.
How can noise impact your health? (Select TWO answers)
29.
What should you do if your supervisor asks you to operate a dumper truck, but you have no experience?
30.
If it's not practical to prevent worker exposure to health-hazardous substances, what must an employer do first?
31.
How many people should be on the same ladder at the same time?
32.
What should your supervisor do if you have to use a vibrating tool?
33.
If there's a chance of airborne materials striking your eyes, which kind of eye protection should you choose?
34.
According to the Work at Height Regulations, how often should a competent person inspect a working platform?
35.
What is the consequence of a prohibition notice being issued for an entire site?
36.
In case of a fire, how would you know where the site assembly point is?
37.
What requirement must you meet to operate a powered hand tool?
38.
What should be used to clean very dirty hands?
